Hello,
How do I export to Blu-ray without downgrading my premier property every tutorial I see looks out of date. It's 2018, is there no way to burn to Blu-ray!?
Thanks
↧
Export to Blu-ray
↧
Encore Not Opening
I just downloaded Encore for the first time and when I open it I get an error stating "Adobe Encore CS6 cannot run in non-royalty serialized mode. The application needs to be serialized with a royalty bearing serial number." I have contacted chat support and all they do is uninstall/reinstall Encore, do a clean uninstall of creative cloud and reinstall everything. I have spent hours by myself and with Adobe trying to get this figured out and it is frustrating, I pay over $60 a month so I can have whatever tools I need quickly and not being able to use this has really caused some major stress. Maybe somebody on here has been thru this and found a fix. I have a Windows PC running Windows 10 OS 64bit and am subscribed to the Creatid ave Cloull apps suite. Can someone please help with this, and not uninstall/reinstall because this has been done hundreds of times and has not worked so that is not the issue. Thanks.
↧
↧
Adobe illustrator
- Is it possible to select pressure brush tool on pc (it's greyed out)? And if it's possible what i need to enable it.
↧
How to go from multiple chapters ONE timeline to the menu
Recently had to convert a VHS to a DVD, where the file given to me was 1 Mpeg of the entire VHS capture. Not only that, but there were many interstitial segments which they didn`t want shown on the dvd. Last but not least, the order of sections on the VHS was random, whereas the DVD menu was alphabetical.
No matter what I did to the timeline/segments/chapter markers/menu directions, you`d select an item from the menu, it would play the right item from the [start] chapter marker, but then would totally ignore the [end] chapter marker (and it`s [end action] on the timeline and menu), and carry on playing whatever was left on the timeline (including all the stuff I didn`t want to be seen by the viewer).
Yes, I know the best way is to have been given multiple clips, edited the way they wanted them... but we don`t always get what we want, so have to work with what we`re given.
BUT, it IS possible to have people see only the bits you want them to see (selected from the menu) and then send them back to the menu (highlighted on the next item in the menu), from the one timline:
- Import your mpeg as a timeline.
- Add all your chapter markers (one at the start of the section and one at the end). It`s a good idea to name them, so you know where to drag links to later.
- At the [start] chapter marker of a segment in the timeline, select the [end action] and point it to the menu. This is optional, as apparently it ignores this anyway, but I like to make doubly sure of things with Encore :)
- On the menu item for that segment, point the [link] to the [start] chapter marker on the timeline.
All pretty normal so far, but here`s the trick to get it to go where you want it to go, without playing the whole timeline after it`s supposed to have gone back to the menu.
- Still working from the menu, point the [override] for that segment, to the next item on the menu.
- select the imported movie timeline in the 'project' window, and then press the [Set.....] button in the properties window, and change the remote control button`s to 'Custom' and make sure next/previous chapter, and fast-forward/rewind are de-selected. If they`re left selected then no matter what you do, the viewer can ff or next chapter, and they`ll see all the things you don`t want them to see. Leave pause/play and Title/Menu selected.
Hope this is helpful to some of you....
Storm
No matter what I did to the timeline/segments/chapter markers/menu directions, you`d select an item from the menu, it would play the right item from the [start] chapter marker, but then would totally ignore the [end] chapter marker (and it`s [end action] on the timeline and menu), and carry on playing whatever was left on the timeline (including all the stuff I didn`t want to be seen by the viewer).
Yes, I know the best way is to have been given multiple clips, edited the way they wanted them... but we don`t always get what we want, so have to work with what we`re given.
BUT, it IS possible to have people see only the bits you want them to see (selected from the menu) and then send them back to the menu (highlighted on the next item in the menu), from the one timline:
- Import your mpeg as a timeline.
- Add all your chapter markers (one at the start of the section and one at the end). It`s a good idea to name them, so you know where to drag links to later.
- At the [start] chapter marker of a segment in the timeline, select the [end action] and point it to the menu. This is optional, as apparently it ignores this anyway, but I like to make doubly sure of things with Encore :)
- On the menu item for that segment, point the [link] to the [start] chapter marker on the timeline.
All pretty normal so far, but here`s the trick to get it to go where you want it to go, without playing the whole timeline after it`s supposed to have gone back to the menu.
- Still working from the menu, point the [override] for that segment, to the next item on the menu.
- select the imported movie timeline in the 'project' window, and then press the [Set.....] button in the properties window, and change the remote control button`s to 'Custom' and make sure next/previous chapter, and fast-forward/rewind are de-selected. If they`re left selected then no matter what you do, the viewer can ff or next chapter, and they`ll see all the things you don`t want them to see. Leave pause/play and Title/Menu selected.
Hope this is helpful to some of you....
Storm
↧
Flash DVD... Motion menus are coming out black
I have previously used the flash output in Encore in CS3 and CS4. First time using it in CS5. I like to use video clips as menu backgrounds and have done it many times before. I link both the video and the audio to the menu in the motion properties window. In CS5, it appears that this function works for DVDs, but not for Flash. When I do the Flash export, the menus are just a black screen with the audio I linked to.
↧
↧
How do I get Encore with Premiere Pro CC?
I installed CC aps and uninstalled CS6 apps. Apparently Encore was unistalled with Premiere CS6. I now have no option to install Premiere CS6. How do I get Encore?
↧
How do I import an SRT or SCC file into Encore?
All I want is add subtitles in different languages that can be toggled on and off, the subtitle/captioning service offered .srt and .scc files and neither are working in either Premiere or Encore.
Using CC 2015 on Mac. Thanks very much.
- Ariel
↧
internal software error- Encore 6.01
So I have not made a DVD in a while and am getting an usual error while building.
I exported several sequences from Premiere 11.1.2 into Media Encoder as a m2v file. Nothing unusual...it worked fine. Plays back fine in encore. But when I try and build the DVD image I get the following error. This is the first timeline, called" Introduction".
PCG"Introduction: has an error at 00:02:31:28. Internal Software error: 0%, line Introduction- PCG Info: name=Introduction, ref=Cpgc, time= 00:02:31:28.
This is right at the very end of the sequence. The only thing I can think of as an issue is the sequence exports from Premiere were at 23.976 and I transcoded to 29.97 in AME.
As a test, I made a ProRes version of the sequence and imported into Encore and transcoded using one of the presets. Seems to work fine. Only issue I have is that I think it looks a little blurrier. I guess I can live with that but just curious what the heck the error is.
And I guess my only other question is should I leave everything at 23.976 and let Encore create the SD DVD at 29.97?
↧
save a project as a template in encore
Hi
Is there a way to save a project as a template in Encore? I have created my project and all is fine but I want to make a couple of discs using the same project but with different contents, video,sound,pics and so on.
Any help would be appreciated. Thanks in advance.
Peter
↧
↧
burning dvd from Encore
When attempting to burn a dvd my file is 3.7 ...however my computer is saying I dont have enough space on my blank disc
↧
Effect of ignoring "Title Remote Not Set" message
When I build an autorun DVD with no menu (Encore CS5) and set the timeline as first play, the build test shows a "Title Remote Not Set" message... which I have always ignored and gone ahead with the project build to ISO (other than "not set" the only option in the Disc tab is for "Stop" which I don't think I want)
I have 2 DVD players, and neither remote control has a TITLE button, so I just figured I could ignore what seems to be a warning, not a real "error" that would stop the project
But... I'm curious... is there some part of the DVD specification that I'm missing, and will having the "Title Remote Not Set" cause some kind of problem?
↧
How do I get 5.1 surround audio into Encore?
Trying to get my 5.1 surround mix from Premiere CC into Encore to author a Blu-Ray and DVD. Exported AAC file from Premiere. Imported it into Encore. When I look at Quality Presets in Encore, the audio tab shows basic audio settings as Dolby Digital Stereo with no option to change it to 5.1. I built the project anyway and played it on a Blu-Ray player and heard only L & R audio channels.
↧
Walk-Through: Fixing Menu Button Routing
Encore defaults to automatically setting the button routing (the selection path among the menu buttons during playback, as you use the remote's arrow keys). For custom-built menus, the automatic button routing often give quirky button paths (dead-ends, strange routes, ...). Fix this manually as follows.
______________________________________________________________________________________
1 - In Project Panel (top left), on Menus tab…
- Click on the menu of interest to select it.
2 - In Monitor Panel (top middle)…
- Select the tab for that menu (as opposed to the tabs for Monitor or Flow Chart).
- Click the button to "Show Button Routing" (bottom of Monitor panel, 3rd button from left).
3 - In Properties Panel (top right)…
- Select the Basic Tab.
- Uncheck the button for "Automatically Route Buttons" (~3/4 down the panel; it's checked by default)
Note:You won't see this button if you are editing the buttons themselves - i.e., if in the Layers Panel (btm right) the buttons are listed and any are selected. You have to be at the menu level, not the button level, of selection to see this option button. If you find yourself in the button level of selection (where you set what that button opens during playback), you can return to the menu level of selection by clicking on the menu (its name, i.e., line entry, in the list of menus in the menu tab) in the Project Panel (top right).
4 - In the Monitor Panel (top middle), select the Tab for that menu, then ...
- Drag each direction arrow element for each button, to the menu button you want it to go to.
Note: You can drag to the arrow key indicator to that same button (the one the arrow indicator icon is sitting on). Use this, for example, if you don't want the selection path to "wrap" to the top, so that pressing the remote's down arrow from the bottom button would just stay at that bottom button.
Note: For some cases, such stacked buttons (see image below), it may be more intuitive to set up and left arrows to the same target, and down and right arrows to the same target -- e.g.:
Posted 30 May 2016, wrt Encore CS6 version 6.0.2.004.
My goal here is a set of quick-references to remind new or infrequent users how to do important tasks that I did not find fully (or succinctly) documented elsewhere.
About me: I'm a hobbyist user relatively new to Adobe Premiere Pro & Encore, which I use a handful of times a year, but in fairly ambitious projects, at least for a one-person team, and as a hobbyist user. So, remembering the software's pitfalls and the sometimes inobvious paths to getting things done can be tricky for me. To help with that, I plan to write some walk-throughs. And rather than wasting them in just my person files, I thought I'd post them here, in case anyone else can use them. This is the first one. We'll see how many I create.
↧
↧
Encore CS6 Library Content still missing
Hi,
I am running Encore CS6 and have the same issues as reported by many people. eg No Library content (or only a random few buttons and menus) showing in the Library window of Encore CS6 desktop
I have been on the Self Help pages and downloaded the content. I tried the Windows 734MB zipped download and the other additional solution which is listed
This is the one where you select English and it downloads a very big compressed file - when uncompressed gives you the 'en-US' Library Folder.
Then as instructed I copied contents to the Encore location : C:/Program Files/Adobe/Adobe Encore CS6
I then started Encore and made sure the Media was pointing to this location in the 'Edit - Preferences- Media Location selection
Then I was all excited this would solve it and - oh - it didn't !
I've been playing around with this for hours trying to figure out what is wrong and tearing my hair out !!
Does anyone have more info / help they can give me to solve this very annoying problem.
I don't want to do anthing too radical as I am halfway through some final changes to an important Blu Ray disc burn and only needed some better Button builds to use on the menu !
Need to solve it though
Any help welcomed ! Thanks.
N Jones.
↧
How do I burn to a Double-sided disc ?
I've done all my editing in Premiere, I've exported all necessary MPEG-2s, created the DVD Menu, timelines and buttons, even edited the menu some in Photoshop. Now I'm ready to build/burn; my project is too big for a regular 4.7G disc, so I have a stack of double-sided discs. The only-thing I'm not sure about is how do I tell Encore to write to the other side of the disc after it's exhausted the first side ? Do I physically have to flip it ? Cause Encore is telling me the disc is full. Is there a checkbox, a button, a menu option I'm missing ? The project looks good, the check finds no problems; can someone inform and explain how do I burn a double sided disc so that it writes and plays correctly ?
I'm already breaking my project up into multi disc since it was quite big; and my second burn will contain more than the first. Anyways please enlighten this DVD novice.
↧
Encore CS6
Encore CS6 lately crashes constantly when I try to import assets. This is when I am trying to build a DVD. When I export the DVD files, that folder seems to "corrupt" no matter which drive I save them to; when I open the folder, it just closes. Any help is much appreciated.
Lloyd
↧
Access Denied! (Encore CS5)
Haven't used Encore CS5 in a month or so and today when trying to create a new project or open an old one, it goes through the loading transcode settings, etc, then pops up a small warning box with "Access Denied" and when I click OK button the program closes and says Windows is looking for the problem.
Opened CS4 Encore and it works fine on same machine, created project.
Just had a Windows 7 update install yesterday and installed a Matrox MX02 LE PCIe box which seems to be working fine. Premiere is OK, but did notice that AME took 25 minutes to encode a 5 minute piece of HDV to DVD-mpeg today. All 8 processors working at 100%.
I don't use Encore that much (and worse case, I have it on my laptop workstation and can use that as backup until CS5.5 arrives) but the slowdown in AME makes me nervous. Have major web video project in the mill and need to render 13 movies in next couple days.
Any thoughts?
Rick
↧
↧
Export to Blu-ray
Hello,
How do I export to Blu-ray without downgrading my premier property every tutorial I see looks out of date. It's 2018, is there no way to burn to Blu-ray!?
Thanks
↧
Title remote not set
I have been working with premiere and encore for short time. I created a dvd in premiere and all went well. I then exported it to encore set up my time lines menus etc. But for some reason my title remote is not set and it's the only thing I can not figure out. I have been able to figure out just about everything else even though I'm new to this level of authoring. GREAT app and a little over my head but I'm wanting more control and ability.
So what did I miss
So what did I miss
↧
Disc-Size too small - Not enough Space
Hi!
I've got a problem with building a final DVD.
I've got a project with some Video-Files. Finally I want to create an Image or a DVD-Folder. The final project will be about 9-10GB as Encore says while building the Image. That's no problem for me because I set the Disc-Size in Encore to 12GB.
The problem is that Encore shows an message while creating the image saying that Disc-capacity is too small. Clicking "ok" ends the building process.
I checked the poject with "check project" and there's no problem.
I also tried to transcode the movie-files with Premiere 2.0 so that Encore doesn't have to transcode the files but that didn't solve the problem.
I've got enough free disc-space and there are also no "DVD-Rom"-Files added.
I also created a new project several times an it didn't solve the problem.
The former DVD i created was also about 10 GB. There it worked without any problem.
Has anybody an idea to solve the problem?
Sorry for my bad english.
Greets!
Chris
I've got a problem with building a final DVD.
I've got a project with some Video-Files. Finally I want to create an Image or a DVD-Folder. The final project will be about 9-10GB as Encore says while building the Image. That's no problem for me because I set the Disc-Size in Encore to 12GB.
The problem is that Encore shows an message while creating the image saying that Disc-capacity is too small. Clicking "ok" ends the building process.
I checked the poject with "check project" and there's no problem.
I also tried to transcode the movie-files with Premiere 2.0 so that Encore doesn't have to transcode the files but that didn't solve the problem.
I've got enough free disc-space and there are also no "DVD-Rom"-Files added.
I also created a new project several times an it didn't solve the problem.
The former DVD i created was also about 10 GB. There it worked without any problem.
Has anybody an idea to solve the problem?
Sorry for my bad english.
Greets!
Chris
↧